This is the plugin I have been using for a while now. I think its much
nicer to use than a tree style. Treating the filesystem as a buffer is
something I used in emacs and have come quite used to.
This is mainly for stylelint, I don't always have this installed and it
throws an error when you open a sass file and it tries to lint the
buffer. Now it will not know about any linters unless they are in the
PATH.
Eslint has become slow for some projects for reasons unknown. In an
attempt to speed up my linting process, I'm experimenting with eslint_d,
which keeps a process running. For the time being, I'd like to keep
linting and formatting separate from the Language Server Protocol (LSP)
to avoid the need to install every LSP. This way, I can have `shfmt`
without the bash LSP, for example.
For JavaScript, I may consider moving this into an LSP since I use it
for work, which would justify combining responsibilities. However, for
now, I'll be giving eslint_d a try.
Indent Line is no longer in use; it's quite an old plugin, and there are
likely better ways to implement this functionality. For now, I won't be
using any indent markers, and we'll see how that goes. If I encounter
issues, I will explore alternative plugins.
Orgmode was an attempt to bring over the knowledge base from Emacs. Vim
doesn't have the same workflow as Emacs, and everything is less tightly
integrated into a single application. I have now transitioned to using
Markdown and Obsidian, focusing on the more widely-used Markdown
integration.
Conjure is too heavy for my needs. All I require is a simple plugin to
execute Clojure in a REPL. This plugin conflicts with many other plugins
and filetypes, where the LSP (Language Server Protocol) should handle
most of the heavy lifting. I've created my own plugin for my very basic
use case.
See: https://github.com/AdeAttwood/nrepl.nvim
The Ollama plugin provides a simple way to interact with an Ollama
language model from within Neovim. It uses as many of the built in
features as possible like buffers, tabs and markdown. This will make
this as small as possible so you don't have to install plugins with
loads of features you don't use.
In the shell prompt when you were in a directory it would commonly be
`~s/github.com/AdeAttwood/Dotfiles|branch ⇒`
This mapping will shorten this down to try and make the prompt a bit
less intrusive when in a subdirectory of a project.
`~gh/AdeAttwood/Dotfiles|branch ⇒`
A Procfile runner for tmux. Each procfile will have its own tmux session
and each process will have its own window. This way you can use tmux to
attach view logs and also restart individual processes.
This will output the git sha of the merge commit that a given commit is
part of. This can be used to get back to the pull request a commit was
part of. Or it can be used to help revert a hole changeset rather than
only one commit.
There are two wrapper scripts for running codeclimate locally in docker.
This script is adapted from their website. There is also a script that
will output the results in vimgrep format, so they can be easily loaded
into the quickfix list.
Move the linters to run on BufReadPost instead of BufEnter. This was
running the linters whenever a buffer opened, when jumping around
quickly with <CTRL-i> and <CTRL-o> this would cause the linters to run a
lot when there were not needed. Now were are only running them once when
the buffer is read from disk.
Adds a custom function that will add cspell to all of the filetypes.
This will then only run `try_lint` once to improve the performance. Now
neoformat has gone fully async. When calling `try_lint` one after the
other, the first processes were getting canceled.
I have been using this quite a lot and have not missed the search
highlights. When this was on would alway search then use `:noh` to
remove all the highlighting.
When working on the start of a project its nice to know what you are
changing. Or when you are working on a refactor having points to get
back to is nice. When we are done we can go and clean up the history so
it makes sense, for review, or just give our points more descriptive
messages and you don't need to brake your flow when coding.
In markdown I have long lines wrapping as we are often editing docs that
don't stick to 80 columns. This makes it hard to navigate with j and k
imposable to use becase is skips over the wrapped lines.
This now using gj and gk to navigate wrapped lines so j and k will act
naturaly and move down one "line" even on the wrapping.
The jest out put is quite hard to process. This points that were add
into the quickfix list where often incorrect. This is a bit pointless
and I would find myself running it again in the terminal to see all of
the output.
This will have todo until I can find time to create proper test runner,
I really don't like the look of any of the plugins available.
Solargraph is best used installed in your Gemfile, this will allow you
to use manage the versions by each project. This will ensure that we are
using the version in your Gemfile, not the one installed globally.
Sets code folding of diffs and hunks so we can review hunks on there
own. This is good for larger pull requests, you can focus on the hunk
and not get overwhelmed by the rest of the code.
Adds a go to definition mapping for prr lines. This will allow you to go
straight to the line of code when reviewing a pull request. Seeing the
code in full context is really helpful when reviewing. You are then
there in your editor with all the linters and the LSP.
There is some weirdness with `:GBrowse` where it will open the file and
line but only if the line / block is visually selected. This was too
many keystrokes so I added a binding to do it.
You can now run Jest on different parts of our app and populate the
quickfix list with the errors. You can run the tests on
- The current tests under the cursor
- All the tests in the current file
- All the tests on the project
This was an issue when editing files that don't have an lsp server. The
document highlight is only enabled for lsp's. This splits out the
highlighting and the diagnostic float into two separate auto commands.
The document highlight is now only enabled when the lsp is registered.
The diagnostic float is now enabled for all files. This is because the
the vim diagnostics are used for lots of other things like spell checking
and codelimate.
We have the kind of the completion item in the menu as an icon and the
name at the end. Now the end one has been replaced with the source name
so we can see what the completion item is and where it is from.
Due to starting to learn clojure, I've had java classes popping up in
the completion menu. Because they are so long it needs to be wider so I
can see then.
OMG this is AMAZING, it writes files and creates all the directories for
that file working the same as `mkdir -p`. I have honestly had a todo to
create a plugin that dose this on the before save hook for a long time.
Thank you reddit, and remember always read the manual `:help :w`!!
Install all of the tools and config for clojure development. This adds
the first configz module that is not yet properly integrated and
automaticaly run with the `dotfiles` shell command.
Now when loading vim the them from the shell is getting used rather than
only every using tomorrow night. When I use tomorrow it will be
inherited in vim.
Now when the editor is idle it will use the lsp to highlight other
references to the token under the cursor.
It will also show all the diagnostics in a popup like the lsp hover that
I manually use via <C-k>. This is helpful with long diagnostic messages
that run off the edge of the terminal when.
Custom plugin to check the .nvmrc file. When entering a directory, it
checks to see if you have the desired node version installed for the
current project. If it is, it will use it automatically, if not, then it
will ask you if you want to install it. After, it will install all the
JS developer tools for that version of NodeJS.
This is a different implementation than the default oh-my-zsh version.
The main difference is that it will not reset the node version when
leaving a directory. It will only preform an action if there is a
`.nvmrc` file in the current directory. It will not even use the
`nvm_find_nvmrc` command because any interaction with nvm make the
stranded `cd` command extremely sluggish.
The biggest change here is that I am no longer cycling though completion
items as the first thing. Tab will now mainly control the snippet jumps
in completion not items. Completion items can be used exclusively with
<C-n> and <C-p> and <CR> to complete the selected item. If the
completion menu is open and <CR> is pressed, this will select and
complete the first item.
I will soon be able to remove the <C-h> and <C-l> mappings when my
muscle memory adapts as this will now be controlled with tab.
This is to keep things consistent with how I have ivy.nvim working in
vim. All fuzzy finding is now done at the bottom of the terminal with
the preview on top. This prevents the eyes to jumping up and down and
keep the focus to the bottom of the terminal.
This moves all of the snippets into a yasnippet file format so I can
better manage and edit the snippets. I did not like having them all in
one file stored as strings.
This implements a custom file parser that will convert the snippet file
into a luasnip parsed snippet that uses the LSP snippet syntax.
It also ports over some of my most used snippets from the emacs config,
maybe one day I could share the snippet in vim and emacs.
This is a script that will popup a window with a list of windows in a
fzf promp. When selected the window will be focused. If the window is in
another session the session will also be switched and the window focused
This is from the dotfiles a long time ago, its still in vimscript, don't
think I will ever convert it over to lua.
This also disables base16 shell when the terminal is running inside vim
like I am doing with emacs.
I am finding my self wanting to view the output of command nowadays,
rather then wanting to run a quick command and see if its passed or not.
By removing the exit at the end of the command the terminal dose not
close now. If I want the terminal to close I can still append the
command with `&& exit` when using `Run`
This will now use a custom config file `$HOME/.cspell.json` that will
use a custom dictionary for my own words. This will have things like my
name so cspell stop telling me I spelt my name wrong.
Will also add the `--language-id` flag with the current filetype, so it
can match language specific words.
Currently it is set up to use tab to jump between placeholders and go to
the next completion item. This is causing conflicts when typing
variables in the snippet placeholders.
Now you can use <CTRL-h> to jump to the next placeholders. This is only
available when the completion is active so, dose not conflict with
switching windows.
The treesitter plugin for org files was getting setup after the org
plugin was loading, this is throwing errors when trying to view or edit
org files.
Now the plugin order has been changed so it all works correctly
Currently they are only getting saved when you save buffers. I was
missing errors when jumping around because the files do not get saved.
This will now show me the errors when the buffer opens not only when the
buffer is saved and I get to see linting errors when jumping around a
codebase.
This is when inside a snippet the tab get taken over by the completion
menu, you can then not jump to the next mark in the snippet.
Now you can use <C-e> to close the completion menu and tab will then
jump to the next mark in the snippet.
Use the CommandTWildIgnore insted of the wildignore so I can still get
completion for :e in folders like vendor or node_modules but, they will be
ignored from command-t file searches.
This is getting hard to manage cuz the settings.json is always changing
with different things I am playing with. The main editor is vim or
emacs, vscode is just a text editor for using multiple cursors.
Update the terminal prompt so you can step forward and backwards though terminal
props using vims `[[` and `]]` that is included in evil-mode.
Enable goto-address-mode in the terminal so I am click on and open urls in the
browser from the terminal. This is most used for opening create merge requests
links when pushing commits to a branch.
At this point there is a very little I am using of oh-my-zsh. I think it could
be worth looking at removing it and build my own git module based on the
oh-my-zsh one
